FYP2 WEEK 4

 Activity: UPDATE THE BLOCK DIAGRAM

Objective: 
To identify the overall system of the prototype.

The temperature sensor will be the main input for my project. The temperature sensor will read the ambient temperature and the temperature will be shown on the LCD 20x4. The Arduino Uno R3 then processed the analog input signal converted into a digital output. The main output for this project would be the fan, the water pump, and the heater. The sprinkler system is basically a water distribution piping where it enables the water to flow to the roof top.

FYP 2 WEEK 3

Activity: FIRST FYP 2 BRIEFING

Objective:

To be brief about FYP handbook, Project Development, Progress Report, Final Report, Attendance, Assessment forms.

1. Students need to update the logbook/blog regularly
2. The student must meet supervisor for consultation
3. Attendance that below than 80% will be bared.
4. Fyp assessment:

·                     Progress report (logbook/blog) - 20%

·                     Presentation                             - 40%

·                     Final Year Project Report         - 40%

*Presentation Day

Presentation and demonstration of Final Year Project 2 will be in week 17, Wednesday (JUNE 2, 2021)

FYP 2 WEEK 2

 Activity: STUDY ON ARDUINO MODULE

The student continues to collect additional data on the module that needs to be used in the second week of the FYP 2. The data enables the student to have a better understanding of the module's behavior. The student may then plan which module will be utilized to create the prototype based on this information.

FYP 2 WEEK 1

Activity:

The first week of Final Year Project 2 has begun, the first thing that need to be done is to continue progress report that had been done earlier previous semester.

Objective:

• To plan and organize the 17 weeks for Final Year Project 2.
• To continue the progress report which is done earlier in previous semester for Final Year Project 1.
• To complete this semester accordingly as planned.

Content/ Procedure:

Previous Final Year Project 1 Content/ Progress Report: -

• Chapter 1: Introduction
• Chapter 2: Literature Review
• Chapter 3: Methodology

Conclusions:

The Development of Automatic Cooling Roof System for Building Temperature Efficiency had officially began. Chapter 3: Methodology in Progress Report will be constructed again.

FYP1 WEEK 16

 Activity: Proposal Report Compilation and Correction

After I compiled my report, I submit it to Dr. Zuhanis for the plagiarism check. Turn out that my plagiarism result is 40%. So I need to reduce it to less then 20% (<20%). Then I made some correction using the plagiarism result report as reference. After I have done with my correction, I resubmit my new FYP 1 Report to Dr. Zuhanis to do the plagiarism check and my plagiarism result is 10%.  

FYP1 WEEK 15

 Activity: Proposal Report Compilation and Correction

For this week, I just focus on Chapter 3 which is the methodology of my project like block diagram, circuit diagram and flow chart. I have done some research about the related article that I want to use as references. The writing continued as usually.

Addition in FYP1 Report:

• Table Of Contents
• Acknowledgment
• Abstract
• References

FYP1 WEEK 14

 Activity: Proposal Report Compilation and Correction

Same as last week, this week I do some correction of words and also add some figures to complete the report of FYP1.

Addition in FYP1 Report:

• Table Of Contents
• Acknowledgment
• Abstract
• References

FYP1 WEEK 13

Activity: Proposal Report Compilation and Correction

Basically, starting this week onward, I started to compiled my report that I have done which is Chapter 1 Introduction, Chapter 2 Literature Review, and Chapter 3 Methodology. I also do some correction of words and also add some figures to complete the report of FYP1.

Addition in FYP1 Report:

• Table Of Contents
• Acknowledgment
• Abstract
• References

FYP1 WEEK 12

Activity: Proposal Defense Presentation Day

The presentation started at 2.00 pm via Microsoft Teams.

The assessors that assessed me was Madam Norrolhoda Binti Sanis and Sir Abdul Razak Bin Ahmad. Both lecturers are from the Electrical Engineering Technology Section.

Information about assessors:

FYP1 WEEK 11

Activity: Final FYP1 Briefing

Title: FYP Proposal Defense and Submission of Progress Report & Proposal Report

In this week, the briefing was conducted in Microsoft Teams and the attendance of all FYP 1 students in compulsory.

              Date: 7/10/2020

              Venue: Microsoft Teams

              Time: 3pm - 5pm

In this briefing, the FYP committees have briefed us about:

• Proposal Defense Presentation
• Introduction
• Problem Statements
• Objective
• Scopes of Project
• Circuit Diagram and Flow Chart

FYP1 WEEK 10

 Activity: Block Diagram and Flow Chart

Objective :

To identify the overall system of the project.

Content :

During my research, I have come out with this block diagram and flowchart. 

Block Diagram

Flow Chart

FYP1 WEEK 9

Activity: Workshop on Methodology

The briefing was conducted through Microsoft Teams and the attendance of all FYP 1 student is compulsory.

                Date: 23/9/2020
                Venue: Microsoft Teams
                Time: 3pm – 5pm


In this briefing, the FYP committees have briefed us about:

• Block Diagram
• Material and Methodology must support scope of studies.
• Should be clear explanation on this part.
• Product based project.
• Higher mark will be given to the excellent explanation.
• Flow Chart

FYP1 WEEK 8

Activity: Study About Arduino

Objective :

To identify the suitable type of Arduino used for this project.

Content :

Arduino is an open-source platform used for building electronics projects. Arduino consists of both a physical programmable circuit board (often referred to as a microcontroller) and a piece of software, or IDE (Integrated Development Environment) that runs on your computer, used to write and upload computer code to the physical board.  Additionally, the Arduino IDE uses a simplified version of C++, making it easier to learn to program. Finally, Arduino provides a standard form factor that breaks out the functions of the micro-controller into a more accessible package.

Types of Arduino :

1.    Arduino Uno (R3)

The Uno is a great choice for your first Arduino. It’s got everything you need to get started, and nothing you don’t. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a USB connection, a power jack, a reset button and more. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.

FYP1 WEEK 7

Title: Workshop on Introduction and Literature Review

Basically for this week is about the briefing of the FYP 1. The briefing was conducted through Microsoft Teams because we can't have a face to face meeting since there is a pandemic going around which is COVID-19. The attendance of all the student that are taking the FYP 1 was compulsory.

In the briefing, the FYP committees have briefed us about :

·         Introduction

·         Objectives

·         Problem Statements

·         Scope of projects

·         Project Assessment

·         Literature Review

FYP1 WEEK 6

Title: RESEARCH AND FINDINGS

Activity : 

• Finding a source like article, journal, and article about Cooling System
• Study and learn some system that using in this project
• 
  

Objective :

• To learn the cooling process work.

Conclusion :
Conclusion for this week I have done some study regarding my project and understanding about cooling process

FYP1 WEEK 5

 Activity: Final week for FYP Supervisor and Title Registration

This week is the final week to find supervisor and register our title. After a lot of research, I have come out with 2 project title. The first title is The Development of Automatic Cooling Roof and the second title is IoT Based Traffic Light Information System.

I decided to search for lecturers that are still available to be the supervisor for FYP. I went to see Dr. Zuhanis Binti Mansor and then ask her to be Supervisor of my Final Year Project. Usually, the name that has been in Supervisor list need their own quota for the student to be under his/her supervision.

Dr. Zuhanis asked me about my project title and then we have decided to pick the Development of Automatic Cooling Roof Using PLC since it is related to my course.

FYP1 WEEK 4

Activity: SURVEYING TITLE FOR FINAL YEAR PROJECT

For this week, as was briefed in the Introductory FYP1 Briefing, students may choose the titles that are offered by lecturers (FYP supervisors) or come out with own ideas. After doing some thinking, I decided to go for titles that are offered.

The titles that are offered can be seen at the FYP website which is http://fyp.bmi.unikl.edu.my/. I read through the list of the titles and each synopsis of the project so that I can understand the requirement and criteria needed to complete the project.